Mechanical Spindle with Automatic Tool Change
For use in woodworking, plastic, and light alloy machines, XLB series automatic tool change mechanical spindles are ideal for low speed - high torque applications such as shaping, sanding, moulding, grinding and polishing. Available in HSK - DIN69893 clamping systems and equipped with independently balanced clamping systems. The toolholders are retained by special springs and they are released by a pneumatic cylinder. Proximity sensors are incorporated to insure maximum safety and control of the tool change along with a push button for manual operation.
Spindle Specifications
- FEATURES:
- Natural Air Cooling
- Double Acting Pneumatic Cylinder
- Air Pressure Seal of Front and Rear Bearings
- 4 Safety sensors with Cam Adjustment
- Quick connect plug for signal connections
- HSK 63F (DIN 69893-5) Tool Clamping
- Max Speed: 7,400 RPM
- Dual Angular Contact Bearings front and rear
- Mounting holes for either left or right mounting
- Many different pulley configurations available
- Offset spindle nose for lower centerline height (closer to workpiece)
| MODEL | HP RANGE | RPM RANGE | WEIGHT (LBS) |
TOOL RECEPTACLE |
|---|---|---|---|---|
| S1 DUTY (100 %) |
DIN 69893 FORM A-B-E-F |
|||
| XLB 120 | 0 - 25 (HP) | 0 - 7,400 (RPM) | 51 | HSK 63-F |
Power and Speed Scenarios
| Belt Width (mm) | Teeth on Driver | Teeth on Driven | Ratio | Motor RPM | Spindle RPM Max. | Motor HP |
|---|---|---|---|---|---|---|
| 12 | 34 | 34 | 1:1 | 1750 | 1750 | 5.5 |
| 12 | 34 | 34 | 1:1 | 3450 | 3450 | 10 |
| 12 | 64 | 34 | 1:2 | 3450 | 6900 | 15 |
| 20 | 34 | 34 | 1:1 | 1750 | 1750 | 12 |
| 20 | 34 | 34 | 1:1 | 3450 | 3450 | 18 |
| 20 | 64 | 34 | 1:2 | 3450 | 6900 | 25 |
